Report item
Item specifics
  • Brand Name: OOTDTY
  • Model Name: sbD11206
  • External Testing Certification: CCC
  • number: D11206
Product Description


  • Function:
  • Speed Display( kmh/mph )
  • RPM Display
  • Fuel Level Table
  • oil pressure warning light
  • check engine (warning) light
  • Water Temperature (coolant temperature)
  • Show time (hours and minutes)
  • Metric units switch
  • Waterproof
  • Operating temperature: -30  ~ 80 
  • Storage temperature: -35  ~ 85 
  • The Power voltage: 12V DC
  • Backlight:blue
    Installation Notes:
  • No friction or contact between the hall probe and the magnet.
  • Engine rotate speed comes from the ignition signal. The sensor wire is normally contacted with the positive side of the magnetor or directly wired on the rectifier.
  • Oil Mass can be wired on the original sensor.
  • Do NOT wired on the headlight if it had been modified as the HID Xenon light. Instead, connect it on the headlight control wiring.
  • Please follow the above Wiring indication. If any problem, please contact us again.
    How to adjust this clock to fit your bike size if you bike tire is 13\'\' 17\'\' 18\'\' 19\'\' 21\'\'
    1 .contact the power wire and put the 1st black button in the left
    2. please adjust flower the below number
    17\'\'- 1800
    18\'\' -1900
    19\'\' -2000
    21\'\'- 2300
  • Orange line: left turn signal light
  • Light blue line: Right turn signal light
  • Blue line :low-high beam indicates
  • Blue and white wire: water temperature
  • Yellow and white: gasoline sensing line
  • Black and yellow line :speed (connected to the engine pulses)
  • Red wire :Positive
  • Green wire: negative
  • Black wire: electric door lock switch (positive control off-line power door locks, can be directly connected to the positive of the fuel gauge )
  • Green and yellow wire: handbrake parking indication
  • The wiring instructions you gave me were wrong. The wire number 9 (black) is not for \'the electric door lock line\' as stated. It is the ignition switch.
  • This speedometer only work with 2 or 4 cylinders.
    Wiring instructions:
    1- orange left turn
    2- blue sky right turn
    3- dark blue lighthouse witnesses
    4 green and white coolant temperature
    5- yellow and white fuel gauge (or -).
    6 black and yellow signal has turn (+ coil or rectifier).
    7- red clock (+)
    8- green ground (-)
    9- Black + after ignition or pilot
    10- green and yellow brake or witnessed death bridge

    Note:Please be reminded that due to lighting effects and monitor\'s brightness/contrast settings etc, the color tone of the website\'s photo may different from the actual item\'s.
  • Package includes:
  • 1 x LCD digital Motorcycle odometer speedometer
  • 1 x sensor cable
  • 1 x magnetic steel
  • aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.5kg (1.10lb.)
  • Package Size: 35cm x 34cm x 28cm (13.78in x 13.39in x 11.02in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.5kg (1.10lb.)
  • Package Size: 35cm x 34cm x 28cm (13.78in x 13.39in x 11.02in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.