Report item
Item specifics
Product Description
The batteries inside receiver is not included because of the strict air shipping policy,hope you can understand!!!!
 

A54251 (1)

A54251 (4)

Technical Data

Battery type: NOKIA/BL-5CA

Net Weight: 120g (without battery)

Length of Line (GPS): 1.5M

Length, Width, Height: 7.3cm *5.0cm*1.6cm

Constant usage time: 20 Hours

Duration of Charge: USB 2 Hours

 

Preparation before Using

 

1. It is suggested to use it in open space without shelter of tall buildings and trees to ensure

signal strength.

2. After opening CHEETAH, the chip starts to warm up and search forsatellite in the first 40

seconds. It will last for 40 to 120 seconds according to the signal strength until the signal

on the screen no longer blinks.

3. After satellite finding finishes, run slowly for a few minutes to make the GPS signal accurate

and steady.

Description of Display and Buttons

1.Signal bar, it stops blinking when there is signal
2. Menu
3.Current time
4. Battery level
5.Battery jar
6. USB interface
7. Press and hold for 2 seconds to set the start point
8.Press and hold for 2 seconds to change between different menus
9. Press to start /end timing; Press and hold for 2 seconds to turn on /off the back light
10. Signal receiver

 

LAP Menu

To run laps, press and hold button “O” for 2 seconds until it shows LAP; Then press “Enter”

button to start; Press “Enter” button again to end;
You may need to define your start point by pressing and holding“up”for 2 seconds;
You can press “up” and ”down” to review the data.

 

 

DRAG Menu

 

To run drag times, press and hold button “O” for 2 seconds, until it shows DRAG; Then press

“Enter” button to start; Press“Enter” button again to end;

Make sure the car or motorcycle is 100% still during operation;

You can press “up” to review the data, and press “down” to review the Speed Graph for initial

0~12 seconds.

Abscissa axis: Stands for time (0-12 seconds)

Vertical axis: Stands for speed

Horizontal line: Stands for speed 100KPH(60MPH)

 

SECTION Menu

 

To run section, press and hold button “O” for 2 seconds until it shows seconds; Then stop

your vehicle at your point A, press and hold “up” for 2 seconds to define point A in your device

, press and hold “down” for 2 seconds to define your point B; After points set, press button “Enter”

to start timing; Press “Enter” button again to end.

You can press “up” and ”own” to review the data.

 

SYSTEM SETTING Menu

 

To change your time setting, press and hold button “O” for 2 seconds, until it shows “SYSTEM

SETTING”; If you know your time zone, please input the time zone, like “-08” for California;

To change between KPH and MPH, press and hold button “O” for 2 seconds, until it shows

“SYSTEM SETTING”;“Radius”Setting, leave it unchanged;

Notes: Set Radius to a smaller number when you find GPS counts more laps than your real

ride. Or set the Radius number bigger when you find the GPS timer missed a lap

If you want to become distributor, the welcome page of this time is open for custom design;

 
Package include: 1* gps lap timer( battery is not included because of the strict air shipping policy)
Packaging Details
  • Unit Type: piece
  • Package Weight: 1.5kg (3.31lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 1.5kg (3.31lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.